O stitch length button – Kenmore 19501 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

■

o Stitch Length Button

This button sets the stitch length tor both straight and zigzag stitches.

When you press the stitch length button, the stitch length light will go on and

the indicator screen will show the pre-set stitch length;

2 .0 " for straight stitching

"1.5" tor zigzag stitching

NOTE; The range of stitch length depends on the stitch pattern you select.

Press the " button.

The stitch length will decrease

— by

0 .1 mm from "1 .0 " down to "0 .0 "

— by 0.5 mm from "4.5" down to "1.0"

To Increase the Stitch Length:

Press the "+" button.
The stitch length will increase

— by

0 .1 mm from "0 .0 " up to "1 .0 ".

— by 0.5 mm from "1.0" up to "4.5",

To Adjust the Stitch Length Quickly:

Hold Down the

"+"

or " button until you reach the length you desire.

To Return to the Preset Stitch Length:

(or clear the stitch length setting)

Press the Stitch Length button again (or press the Clear button). The stitch

length light and the indicator screen will go off.