Kenmore 19501 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■SsPlWl
'
■ -SECTION 2. ■'PREPARE YGUR MACHINE FOR.SEW1NJ3-'■
Set Up the Machine
• Plug in the Machine and Switch on the Power
NOTE:
Before inserting the plug into your
machine, be sure the power switch is
OFF,
1. Check your outlet to be sure it is a 110 to 120
Volt AC outlet.
2
.
Insert the machine plug into the five-prong
outlet, as shown. It will only fit one way.
3.
Insert the power supply plug into the outlet.
4.
Push the light and power switch to turn on the
power and sewing light.
SAFETY FEATURE:
Your machine will not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children.