Kenmore 19501 - Manual (Page 32)

Memory Button Clear Button
. SECTION 3. LEARN TO USE THE CONTROLS
Straight and Zigzag Stitch Buttons
The Memory Button, with its mernory
indicator light, will "memorize" your
pattern selection. Your machine can
remember up to 31 stitch patterns,
including the Auto-Lock, which auto­
matically reinforces or locks the stitch
you have chosen. This button is most
typically used when monogramming or
combining patterns.
To Set the Memory;
Press the Memory Button after you
select your stitch pattern. The
memory indicator light will go on to
show that the machine has recorded
your selection.
NOTE; If you are selecting a senes
of different stitch patterns,
you must press the memory
button after each selection.
The Sensor Sew 70 will
remember them in order.
The Clear Button will erase the stitch
pattern you have selected and auto­
matically return your machine to
|T51
: the straight stitch pattern.
The Clear Button works in two ways
to clear a series of stitch patterns,
depending on whether you have
pressed the foot control.
Foot Control Not Pressed:
The Clear Button clears one stitch
pattern at a time, beginning with the
last selected and ending with the first
selected until it comes to " 1 0 "
This allows you to correct any
mistakes you may make while pro­
gramming a senes of patterns.
Foot Control Pressed:
(even if only one stitch)
The Clear Button deletes all stitch
patterns in the series at once. You see
a 0 o] right away.
SensarSeui ?Q ScnsorSeui 7Q
01] QCDCi] OiDQDmCI]
mmcD QQCI]
iZDCIDCi] «BCDmiz)
You can set each of these most used stitches by pressing just one button;
Straight or Zigzag. The pattern indicator screen will show [l0] (Straight) or
iisl (Zigzag).
31