Gdiztodcd, Qsgd -qcdscd, 1 fzicdci – Kenmore 19501 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5. LEARN THE STITCHES
0
Pintucking
Set the Machine
1
SeraiBrSeui TO
1
1
GDiZtODCD
C|^
QSGD
-QCDSCD
! D
1 fZICDCi®
Press
Thread
tension
3 to 6
G. Blind stitch
hem toot
The Stitch and Its Uses
Pintucks are narrow tucks spaced close
together to add design interest on such items
as blouses and pillowcases. One pintuck can
torm a permanent front crease on knit pants.
1. Attach the blind stitch hem foot.
2.
Place the folded fabric under the presser foot.
3.
Position the needle 1/16" inside from the folded edge and lower the presser
foot.
4.
Adjust the sliding guide on the blind hem foot to the folded edge by turning
the guide screw, as shown.
5.
Feed the folded edge smoothly against the sliding guide.
NOTE I If the fabric tends to pucker, hold the material slightly taut while
sewing. Also, try decreasing the upper tension slightly.
53