Carl Goldberg GBGA0055 - Manual (Page 8)

8
3. ■ ■ Place waxed paper over the elevator section of the
plan.
■ ■ Trim and glue the 5/16” square balsa sticks over the
plan, pinning as you go.
4. ■ ■ Glue the HORN MOUNT ASSEMBLIES and the
CORNER GUSSETS into the frame.
1. ■ ■ Collect the items needed to construct the VERTICAL
FIN. They include:
(3) 3/16 x 5/16 x16” BALSA STICKS PT. #4369
(2) 1/16 x 3 x 18” BALSA SHEETS PT. #4538
2. ■ ■ Cover the fin portion of the plan with waxed paper.
■ ■ Trim the 3/16 x 5/16” balsa sticks and pin over the plan,
gluing as you go.
VERTICAL FIN CONSTRUCTION (4 Steps)