Carl Goldberg GBGA0055 - Manual (Page 29)

29
11. ■ ■ Slide in the “SLANT” former.
12. ■ ■ Flip the fuselage over and install the bottom sheet.
■ ■ Position the fuselage over the TOP VIEW of the plan
and check the alignment. Use small pieces of masking
tape to secure the structure as you go.
■ ■ Sight-check down the fuselage to insure against twist.
13. ■ ■ When the fuselage is perfectly aligned, glue all of the
seams created by the sides, top, bottom and formers.