Carl Goldberg GBGA0055 - Manual (Page 21)

21
■ ■ Slide the pushrod assembly through the openings in
the wing ribs from Rib #6 toward the center.
■ ■ Install the hardware to mount the bellcrank to the
platform.
25. ■ ■ Using the plan for reference, cut the aileron pushrod
exit holes in the T.E. sheeting.
26. ■ ■ Make to pushrods to fit the template shown here.
27. ■ ■ Install the threaded pushrods onto the bellcranks and
secure with a snap-nut. Place a drop of JET glue onto
the snap nuts.
■ ■ Referring to the plan, fix the bellcranks in the neutral
position with a “T” pin.
28. ■ ■ Assemble the aileron coupler.