Cabletron Systems SmartSTACK ELH100 - Manual (Page 88)

70 Web-Based Management ELH100-12/24TX
Port Backup
Select “Port” then “Port Backup” to display/configure redundant links.
Item Description
Index Identifier for up to 15 backup port pairs.
Primary Hub Hub ID for the master port.
Primary Port Port identifier for the master port.
Secondary Hub Hub ID for the slave port.
Secondary Port Port identifier for the slave port.
Action Each backup pair can be set to Active or Inactive.
Status Active is displayed if the backup port has taken over the link.
Inactive is displayed if the primary port is still handling the link.
Standby is displayed if there is no link on the primary port.