Backup port control menu – Cabletron Systems SmartSTACK ELH100 User Manual
Page 61
9033060
ELH100-12/24TX User Interface 43
Backup Port Control Menu
Select Backup Port Control from the Port Configuration screen to define
up to 15 master/slave port pairs. If the connection to the master port fails,
the slave port will automatically take over. For greater reliability, primary
and secondary ports should be located on different hubs. The following
screen and table show how to specify and activate port backup pairs.
Figure 3-13. Backup Port Control Menu
Backup Port Control
Index
Primary Port
Secondary Port
Status
Active Port
----
---------
-----------
-----
--------
1
Hub: -- Port: --
Hub: -- Port: --
--------
---------
2
Hub: -- Port: --
Hub: -- Port: --
--------
---------
3
Hub: -- Port: --
Hub: -- Port: --
--------
---------
4
Hub: -- Port: --
Hub: -- Port: --
--------
---------
5
Hub: -- Port: --
Hub: -- Port: --
--------
---------
6
Hub: -- Port: --
Hub: -- Port: --
--------
---------
7
Hub: -- Port: --
Hub: -- Port: --
--------
---------
8
Hub: -- Port: --
Hub: -- Port: --
--------
---------
9
Hub: -- Port: --
Hub: -- Port: --
--------
---------
10
Hub: -- Port: --
Hub: -- Port: --
--------
---------
11
Hub: -- Port: --
Hub: -- Port: --
--------
---------
12
Hub: -- Port: --
Hub: -- Port: --
--------
---------
13
Hub: -- Port: --
Hub: -- Port: --
--------
---------
14
Hub: -- Port: --
Hub: -- Port: --
--------
---------
15
Hub: -- Port: --
Hub: -- Port: --
--------
---------
Type the hub ID for the primary port
Use
Field
Description
Index
Identifier for up to 15 backup port pairs.
Primary Port
Pair member serving as the primary link.
Hub
Hub ID for the master port.
Port
Port identifier for the master port.
Secondary Port
Pair member serving as the backup link.
Hub
Hub ID for the slave port.
Port
Port identifier for the slave port.
Status
Each backup pair can be set to Active or Inactive.
Active Port
Indicates if the primary or secondary port is handling the link.