Cabletron Systems SmartSTACK ELH100 - Manual (Page 66)

48 ELH100-12/24TX User Interface ELH100-12/24TX
Hub Statistics Menu
The Hub Statistics screens display statistics for the 10 and 100 Mbps
stack segments. These values can be used to indicate the approximate
loading for each segment. You can use the Hub Statistics Overview
screen to display key statistics for all hubs in a stack or detailed statistics
for each individual hub. The Hub Statistics screens are shown in
Figure 3-18 and Figure 3-19, and described in the accompanying tables.
Figure 3-18. Hub Statistics Overview Screen
Hub Statistics Overview
=======================
10Mb/s Segments
Hub Frames
Bytes Collisions CRC Errors Tot.Errors Reset Details
--- -------- ------- ------- ------- ------- ------- ------
1 892 121329 0 0 0
100Mb/s Segments
Hub Frames Bytes Collisions CRC Errors Tot.Errors
--- ------- -------- ------ -------- -------
1 736685 112506135 425 6 620
Press to reset both 10 and 100 Mbit statistics counters for this hub
Use or cursor keys to move, to select
Field Description
Hub Hub identifier within the stack.
Frames Number of frames passing through this hub.
Bytes Number of bytes passing through this hub.
Collisions Number of simultaneous node transmissions detected by this hub.
CRC Errors Number of Ethernet Cyclic Redundancy Check errors detected by
this hub.
Total Errors Total number of errors, including FCS, alignment, Frames Too
Long, Short Events, Late Events, Jabber, and Data Rate
Mismatches detected on this device.
Reset Resets the statistics counters for the hub.
Details Highlight “Detail” and press to display the detailed statistics
screen for the hub.
Refresh Statistics Refresh the displayed statistics.
Auto-Refresh
Statistics Refresh statistics at the interval specified in Console Configuration.