Cabletron Systems SmartSTACK ELH100 - Manual (Page 21)

9033060 Product Overview 3
• Switch Architecture (for optional switch/media modules):
- Bridges 10 and 100 Mbps repeater buses for the stack
- 200 Mbps throughput
- 2 MB packet buffering
- Store-and-forward switching
- Module: 4096 address forwarding table per segment
- Forwarding: 14,880 packets-per-second (64 byte packets)
@10 Mbps; 148,800 pps @100 Mbps
- Filtering: 14,880 packets-per-second (64 byte packets) @10
Mbps; 148,800 pps @100 Mbps
• Network Management:
- SNMP compliant agent: MIB II (RFC 1213); Multi-segment
Repeater MIB (RFC 2108), Ethernet-like MIB (RFC1643);
RMON - Statistics, History, Alarm and Event groups per
segment (RFC 1757); private MIB extensions
- Access via in-band, Internet browser, or Telnet
- Console port (RS-232, male DB-9 connector, null modem)
supports access via direct, modem, or SLIP connection
- BootP for IP address configuration
• Reliability:
- Automatic partition and reconnection
- Automatic polarity detection (and inversion if needed)
- Automatic cascade bypass if a hub in the stack is powered off
- Agent Module supports power-on self test, backup agent
module, port link backup for up to 15 pairs, and intrusion
detection
• Software:
- Extensive diagnostics for product testing and troubleshooting
- Firmware upgrades using the console port or in-band with
TFTP
• LED Indicators:
- System: Power, Switch
- 10 and 100 Mbps segments: Activity, Collision
- 10Base-T/100Base-TX Ethernet hub ports: link/partition/speed
- Switch/Media modules: Collision, Activity, Full/Half duplex, Link
- Agent Module: Active