Cabletron Systems SmartSTACK ELH100 - Manual (Page 85)

9033060 Web-Based Management 67
Hub Configuration
Select “Hub” then “Hub Configuration” to display hardware and firmware
configuration of the hub.
Item Description
Hub ID Hub identifier in stack.
Model The model number of this hub.
Hardware Version Version number of the hub hardware.
Repeater Serial No. Serial number of this hub.
System Version System firmware version.
POST Version Version number of the Agent Module’s Power-on Self-test.
Agent Status Indicates if an Agent Module is installed and active.
Agent Hardware
Version Hardware version number of the Agent Module.
Agent Serial No. Serial number of the Agent Module.
Agent MAC Address Physical address of the active Agent Module.
Agent Baud rate Rate at which data is sent between the Agent Module’s serial
port and the connected device. The supported baud rate is
9600 bps.
Switch Module Indicates if a switch/media module is installed.
Number of Ports Indicates whether this device has 12 or 24 repeater ports.