Cabletron Systems SmartSTACK ELH100 - Manual (Page 65)

9033060 ELH100-12/24TX User Interface 47
Console Configuration Menu
The Console Configuration menu is used to configure the console
connected to the hub’s serial port. The console parameters are described
in the following figure and table.
Figure 3-17. Console Configuration Menu
Console Configuration
=====================
Automatic Logout Status: ON
Automatic Logout Delay Time: 10 Minutes
Auto-Refresh Period: 30 Seconds
Use the space bar to toggle automatic logout
Use or cursor keys to move, to toggle, to select
Selection Description
Automatic Logout
Status Enables/disables the logout function.
Automatic Logout
Delay Time If no input is received from the attached device after this
interval (in minutes), the current session is closed.
Range: 0 - 99 minutes. Default is 10 minutes.
Auto-Refresh Period Specifies the interval at which statistics are read from the
hub.
Options: 30, 60, 120, 180, 300 seconds. Default is 30
seconds.