Canon L240 - Manual (Page 98)

7-16 Sending Faxes Chapter 7
Printing a Document Set for Delayed Sending
Follow this procedure to print a document stored in memory for delayed sending:
Note
When you print a document stored in memory for delayed sending using the
following procedure, the print is reduced to 90% of the original.
1 Open the one-touch speed dial panel.
2 Press Delayed Transmission.
3
Use
▼ or ▲ to select PRINT.
4 Press Set.
5 Use ▼ or ▲ to select the transaction number
(
TX/RX NO.) of the document you want to
print.
•
If you are unsure of the transaction
number (
TX/RX NO.), print the DOC.
MEMORY LIST ( p. 9-5).
• A “
#” before the transaction number
( TX/RX NO.) indicates that that
document is being sent at that moment
and can therefore not be selected.
• Use O or P to display details of the
transaction (e.g. destination).
6
Press Set.
7 Press 6 to print the first page only, or press #
to print all pages of the document.
•
The FAX prints the document.
8 To continue printing other documents set for
delayed sending, repeat the procedure from
step 5.
-or-
Press Stop to return to standby mode.
REGISTER
PRINT
TX/RX NO. 0_001 Ex:
TX/RX NO. #0_003 Ex:
1ST PG ONLY?
YES=()) NO=(#)
15:00 FaxOnly Ex: