Canon L240 - Manual (Page 183)

14-7 Summary of Settings Chapter 14
Su
m
m
ar
y o
f
S
e
tt
in
g
s
RX (Reception) SETTINGS Menu
For details on accessing the settings below, see p. 14-3.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting Description Sub-Settings
ECM RX Enables/disables Error Correction Mode (ECM) during
reception. ON
OFF
RX MODE Selects the receive mode ( Chapter 8).
If you select FAX/TEL AUTO SW, you can select
additional sub-settings ( p. 8-5).
FAX ONLY MODE
NET SWITCH*
FAX/TEL AUTO SW
INCOMING RING When the RX MODE setting is set to FAX ONLY MODE or
FAX/TEL AUTO SW, this setting enables/disables ringing
when the FAX receives a call.**
OFF
ON
RING COUNT Selects the number of rings before the FAX begins
receiving. 2 TIMES
(1 to 99)
MAN/AUTO SWITCH When the receive mode is set to MANUAL MODE, this
setting determines if the FAX switches to fax receive
mode after it rings for a specified time.
OFF
ON
F/T RING TIME If you select ON above, this setting selects the length of
time the FAX rings before switching to fax receive mode.
15 SEC
(1 to 99)
REMOTE RX Enables/disables remote receiving. ON
OFF
REMOTE RX ID If you select ON above, this setting selects the remote
receiving ID.
25
(00 to 99)
MEMORY RX Enables/disables reception of a document in the FAX’s
memory when a problem occurs during reception. ON
OFF
RX PAGE FOOTER Enables/disables printing of the reception date and time,
page number, and transaction number (TX/RX NO.) at the
bottom of each received fax page. OFF
ON
* This setting is available for certain countries only.
** Even if you have set INCOMING RING to ON, ringing will only occur if you have connected the optional
handset or a telephone to your unit.