Canon L240 - Manual (Page 182)

14-6 Summary of Settings Chapter 14
TX (Transmission) SETTINGS Menu
For details on accessing the settings below, see p. 14-3.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting Description Sub-Settings
ECM TX Enables/disables Error Correction Mode (ECM) during
transmission. ON
OFF
MID PAUSE SET Selects the length of a pause entered within a fax/
telephone number with the Redial/Pause button. 2 SEC
(1 to 15)
AUTO REDIAL Enables/disables automatic redialling if the other party’s
line is busy on the first attempt (
p. 7-9).
ON
OFF
REDIAL TIMES Selects the number of redial attempts. 2 TIMES
(1 to 10)
REDIAL INTERVAL Selects the time interval between redial attempts. 2 MIN.
(2 to 99)
TIME OUT Enables/disables automatic scanning of documents after
the fax number is entered.
ON: Scanning begins automatically five seconds after
entering the fax number (10 seconds if sending to multiple
fax numbers).
OFF: Scanning does not start automatically. (You need to
press Start/Copy to begin scanning.) ON
OFF