Canon L240 - Manual (Page 108)

8-8 Receiving Faxes Chapter 8
Receiving Faxes Manually: MANUAL MODE
Set this mode if you only have one telephone line that you use mainly for voice calls,
and only occasionally to receive faxes.
For this mode, you will need to connect the optional handset or a telephone to your
FAX to be able to receive voice calls and also to manually activate reception of
documents. You can activate reception directly from your FAX, or if your telephone
is located away from your unit, you can dial the remote receiving ID on the telephone
to activate reception (this is called Remote reception).
Setting MANUAL MODE
Follow this procedure to set the receive mode to MANUAL MODE:
Receiving a Fax Manually
Follow this procedure to receive a fax manually:
1 Press Receive Mode to select
MANUAL MODE.
•
After a few seconds, the LCD changes to
this display:
1
Make sure Manual is displayed in the LCD.
2 Make sure you have connected the optional
handset or a telephone to the FAX (
p. 2-6).
3 When you hear the optional handset or
telephone ring, pick up the handset.
15:00 Manual
MANUAL MODE
Ex:
15:00 Manual Ex: