Canon L240 - Manual (Page 105)

8-5 Receiving Faxes Chapter 8
Recei
vi
n
g
F
a
x
e
s
Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you only have one telephone line for fax and telephone use and want
your FAX to automatically switch between fax and voice calls.
Setting Fax/Tel Mode
Follow this procedure to set the receive mode to FAX/TEL AUTO SW
(Fax/Tel Mode):
Note
For this mode, you need to connect the optional handset or a telephone to your FAX
(
p. 2-6).
1
Open the one-touch speed dial panel.
2 Press Data Registration.
3 Press Set.
4 Use
▼ or ▲ to select RX SETTINGS.
5 Press Set.
6
Use
▼ or ▲ to select RX MODE.
7
Press Set.
8
Use
▼ or ▲ to select FAX/TEL AUTO SW.
9 Press Set.
• To set the options for FAX/TEL AUTO
SW (Fax/Tel Mode), see the following
pages.
10 Press Stop to return to standby mode.
11 Confirm that FaxTel is displayed in the LCD.
•
If FaxTel is not displayed, press Receive
Mode to select Fax/Tel Mode. After a
few seconds, the LCD returns to standby
mode.
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
FAX ONLY MODE Ex:
FAX/TEL AUTO SW
RING START TIME
15:00 FaxTel Ex:
15:00 FaxTel Ex: