Canon L240 - Manual (Page 180)

14-4 Summary of Settings Chapter 14
USER SETTINGS Menu
For details on accessing the settings below, see p. 14-3.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting Description Sub-Settings
DATE & TIME Sets the current date and time ( p. 3-6). –
UNIT TELEPHONE # Enters the fax/telephone number you want to appear at the
top of each fax page you send (
p. 3-6).
–
UNIT NAME Enters the name or company name you want to appear at
the top of each fax page you send (
p. 3-6).
–
TX TERMINAL ID Enables/disables printing of the sender information
(
p. 3-5).
ON
OFF
TTI POSITION Selects whether the sender information is positioned
inside or outside the image area (
p. 3-5).
OUTSIDE IMAGE
INSIDE IMAGE
TELEPHONE # MARK Selects the prefix for the unit number ( p. 3-5). FAX
TEL
SCAN CONTRAST Selects the scanning contrast ( p. 7-3). STANDARD
DARKER
LIGHTER
OFFHOOK ALARM Enables/disables the off hook alarm that alerts you that
the handset is not seated properly in its cradle. ON
OFF
VOLUME CONTROL Sets the volume of the FAX sounds. –
CALLING VOLUME Selects the ring volume when the FAX detects a voice
call. 1/2/3
KEYPAD VOLUME Selects the keypad touch beep volume. 0 (off)/1/2/3
ALARM VOLUME Selects the error alarm volume. 0 (off)/1/2/3
LINE MONITOR VOL Selects the line monitor volume (sound during dialling). 0 (off)/1/2/3
RX CALL LEVEL Selects the ring type for incoming calls. HIGH
STANDARD
TEL LINE TYPE Selects the telephone line type setting for your FAX
(
p. 3-8).
TOUCH TONE
ROTARY PULSE
R-KEY SETTING Enables dialling through a switchboard.
If you select PBX, you can select additional sub-settings
(
p. 3-9).
PSTN
PBX