Canon L240 - Manual (Page 88)

7-6 Sending Faxes Chapter 7
Manual Sending Via the Handset
Manual sending via the handset allows you to talk to the other party before sending a
document. This method is useful if the other party must manually activate their fax
machine to receive a fax.
Follow this procedure to send a document using manual sending via the handset:
3
Press Start/Copy to begin scanning for
sending, or if you used speed dialling, wait a
few seconds for the FAX to begin scanning
automatically.
• If you do not want the FAX to begin
scanning automatically after a few
seconds, disable the TIME OUT setting
(
p. 14-6).
• To cancel sending once dialling has
started, press Stop then T (
p. 7-8).
• If the number you are calling is busy, the
FAX redials the number automatically
after a few minutes (
p. 7-9).
Note
• You can register up to 20 different sending operations for memory sending.
• The document is automatically deleted from memory after sending. This occurs even
if an error prevents complete transmission of the document.
Note
For this mode, you need to connect the optional handset or a telephone to your FAX
(
p. 2-6).
1 Make sure you have connected the optional
handset or a telephone to the FAX (
p. 2-6).
2 Load the document, face down in the ADF
(
p. 4-3).
• To adjust the resolution and contrast,
see pp. 7-2, 7-3.
3 Press Hook.
• You can also lift the handset instead of
pressing Hook.
DOCUMENT READY
MEMORY USED 0% Ex:
(Currently used memory)
(Standby to scan)
TEL=