AERCO BMK 1000 - Manual (Page 97)

Benchmark 750/1000 Boiler Installation, Operation & Maintenance Manual
CHAPTER 7 – MAINTENANCE
OMM-0082_0J AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 97 of 192
GF-130
Ph.: 800-526-0288 05/21/2014
Condensate Drain Trap Maintenance – Continued
NOTE
T here are two slightly different types of condensate traps that may
be used in your configuration; an older style with a separate inlet
adapter, and a newer style with a built-in adapter (see Figure 7-6).
Maintenance is the same, except that the newer style does not
need an orifice gasket (Step 7).
Figure 7-6: External Condensate Trap
THUMB
SCREWS
COVER
GASKET
FLOAT
GUIDE
FLOAT
CONDENSATE
TRAP
(P/N 24060)
OUTLET
Condensate
Trap O-Ring
Float
Float Guide
O-Rings
(2)
3/4" NPT
Thumb Screws
(4)
INLET
Adapter
Opening