KEYENCE CV-X Series - Manual (Page 13)

KEYENCE CORPORATION. Vision System Division ‐ 13 ‐ www.keyence.com
Click the button at the top right of the screen to switch to Setup Mode.
3. Setting the items to output for the individual tool status
Click "Output".
Select "OUT Terminal".
In the "Count" box, set an output count between 1 and 8. If there are 16 items or less, select 1 time (the default setting).
Select "OUT6" ‐ "Tool Judgment" and then select a tool.
As necessary, assign a Tool Judgment to an OUT terminal between OUT6 and 21.