KEYENCE LB-1000(W) - Manual (Page 6)

6
SAFETY PRECAUTIONS ON LASER PRODUCT
For use without shield:
Place the shield as shown below, and screw in place.
LB-041/LB-081 LB-301
For use with shield:
Attach the shield to the front surface of the sensor head.
LB-041/LB-081 LB-301
PRECAUTIONS ON REGULATIONS AND
STANDARDS
CE Marking
Applicable Models: LB-041/LB-1001W, LB-081/LB-1101W and
LB-301/ LB-1201W
Keyence Corporation has confirmed that these products comply with the
essential requirements of the applicable EC Directives, based on the
following specifications. Be sure to consider the following specifications
when using these products in the Member State of European Union.
■ EMC Directive (2004/108/EC)
• Applicable Standard EMI: EN61326-1, Class A
EMS: EN61326-1
• The length of the cable connected to the Sensor head or the Control-
ler must be less than or equal to 30 m.
Remarks:
These specifications do not give any guarantee that the end-product with
these products incorporated complies with the essential requirements of
EMC Directive. The manufacturer of the end-product is solely responsible
for the compliance on the end-product itself according to EMC Directive.