Canon MPC600F/400 - Manual (Page 70)

9-4
* Can only be adjusted for black & white transmissions. For colour transmissions, the TTI information is
positioned inside the image area.
5. TX TERMINAL ID Enables/disables printing of the sender
information (
→
p. 2-3)
ON
OFF
1. TTI POSITION Selects the position of the identification header
(outside or inside the image area).* OUTSIDE IMAGE
INSIDE IMAGE
2. TELEPHONE #
MARK
Selects the prefix for the identification header
number. (
→
p. 2-3)
FAX
TEL
6. OFFHOOK ALARM Enables/disables the off hook alarm that alerts
you when the handset is not seated properly in its
cradle. ON
OFF
7. VOLUME CONTROL Sets the volume of the machine sounds. -
1. CALLING
VOLUME
When the machine is set to FAX/TEL AUTO
SW , selects the ring volume when the machine
detects a voice call.
1/2/3
2. LINE MONITOR
VOL
Selects the line monitor volume (sound during
dialling and on hook) 0 (off) /
1/2/3
8. RX CALL LEVEL When the machine is set to FAX/TEL AUTO
SW , selects the tone of incoming calls.
HIGH
STANDARD
9. TEL LINE TYPE Selects the dialling method the machine uses for
your telephone line type. (
→
p. 2-6)
TOUCH TONE
ROTARY PULSE
10. R-KEY SETTING Enables dialling through a switchboard. If you
select
PBX , you can select additional sub-
settings. (
→
p. 2-6)
PSTN
PBX
2. REPORT SETTINGS
1. TX REPORT Enables/disables automatic printing of a
transmission report. (
→
p. 7-3)
PRINT ERROR ONLY:
Prints a report only when a transmission error
occurs.
OUTPUT YES:
Prints a report every time you send a document.
OUTPUT NO:
No report is printed.
PRINT ERROR
ONLY
OUTPUT YES
OUTPUT NO
PRINT WITH IMAGE If you select PRINT ERROR ONLY or OUTPUT
YES above, enables/disables printing of the first
page of the fax under the report (black & white
faxes only).
ON
OFF
Name Description Settings