Canon MPC600F/400 - Manual (Page 22)

3-4
7 Press OK .
8 Press Stop/Reset to return to standby mode.
❚ To Delete a One-Touch Speed Dialling Entry:
4 Press and hold to delete the fax/telephone number.
5 Press OK .
6 Press Stop/Reset to return to standby mode.
• The registered name is automatically cleared when you clear the fax/telephone number.
Coded Speed Dialling
■
Registering Numbers for Coded Speed Dialling
1 Press Menu .
2 Use or to select TEL REGISTRATION .
3 Press OK .
4 Use or to select CODED SPEED DIAL .
5 Press OK .
6 Use or to select a coded speed dialling code (00 to
99).
• If a coded speed dialling code has already been registered, the number registered under that code appears.
• If a group is already registered under a coded speed dialling code,
GROUP DIAL appears.
• You can also select a code by pressing Coded Dial and then entering a two-digit code with the numeric
buttons.
7 Press OK twice.
Ex:
NAME :A
DATA ENTRY OK
Ex:
1-TOUCH SPD DIAL
07=
TELEPHONE NUMBER
TEL=
▲
TELEPHONE NUMBER
ERASING END
1-TOUCH SPD DIAL
2.NAME
Ex:
MENU
4.TEL REGISTRATION
▲ ▼
TEL REGISTRATION
1.1-TOUCH SPD DIAL
TEL REGISTRATION
2.CODED SPEED DIAL
▲ ▼
Ex:
CODED SPEED DIAL
00= 2131 1250
Ex:
CODED SPEED DIAL
02=
▲ ▼
CODED SPEED DIAL
1.TELEPHONE NUMBER
TELEPHONE NUMBER
TEL=