Standby display – Canon MPC600F/400 User Manual

Page 10

1-2

Standby Display

The standby display differs depending on which mode is selected. When the machine is turned on, the Copy
Mode standby display appears. You can switch Copy Mode to Fax Mode by pressing

Fax

The standby display in Fax Mode is as follows:

• The standby display in Copy Mode and Scan Mode are,

→

Reference Guide.

■

Fax Mode

D.T.

Polling

Coded Dial

Hook

Redial/Pause

Hook Button
Engages or
disengages the
telephone line.

Coded Dial Button
Press this button and a two-
digit code to dial a pre-
registered fax/telephone
number or group.

Redial/Pause Button
Redials the last number that was dialled with the numeric
buttons. Also enters pauses between or after the fax/
telephone number when dialling or registering numbers.

R Button
Dials the outside line access number when
the machine is connected through a
switchboard (PBX).

Polling Button
Polls another fax machine.

D.T. Button*
Confirms the dial tone when dialling a fax/telephone number
* This feature is only available for some countries

One-Touch Speed Dial Buttons
Dial fax/telephone numbers pre-registered for one-touch speed dialling

20/12 2002 FRI 15:30

FaxOnly

STANDARD

Receive Mode

Image Quality

Date & Time