Canon MPC600F/400 - Manual (Page 23)

3-5
3
3
Spee
d Dial
lin
g
8 Use the numeric buttons to enter the fax/telephone number
you want to register (max. 120 digits, including spaces and
pauses).
• Use to enter a space and move the cursor to the next digit. Spaces are optional and are ignored during
dialling.
• Press Redial/Pause to enter a pause.
• If you make a mistake, press to delete the last number or press and hold to delete all numbers you
entered.
9 Press OK twice.
10 Use the numeric buttons to enter the name that goes with
the number (max. 16 characters, including spaces).
• If you do not want to register a name, ignore this step.
• If you are unsure how to enter characters,
→
p. 2-1.
11 Press OK .
12 To continue registering other coded speed dialling codes, repeat the procedure from step 6.
-or-
Press
Stop/Reset to return to standby mode.
• You can print the CODED SPEED DIAL LIST showing all the numbers and names registered for coded speed
dialling ( → p. 3-9). Keep this list near your machine for easy reference when dialling.
■
Changing/Deleting a Coded Speed Dialling Entry
1 Follow steps 1 to 5 of “Registering Numbers for Coded Speed Dialling”. (
→
p. 3-4)
2 Use or to select the coded speed dialling code
assigned to the entry you want to change or delete.
• You can also select the code by pressing Coded Dial and then
entering the two-digit code with the numeric buttons.
3 Press OK twice.
Ex:
TELEPHONE NUMBER
TEL=1 49 39 25 25
▼
▲ ▲
TELEPHONE NUMBER
DATA ENTRY OK
CODED SPEED DIAL
2.NAME
NAME :A
Ex:
NAME :A
Canon FRANCE
Ex:
NAME :A
DATA ENTRY OK
Ex:
CODED SPEED DIAL
03= 516p488 6700
Ex:
CODED SPEED DIAL
32= 81 773 3115
▲ ▼
CODED SPEED DIAL
1.TELEPHONE NUMBER
Ex:
TELEPHONE NUMBER
TEL=81 773 3115