Dialling through a switchboard, Restricting use of your machine – Canon MPC600F/400 User Manual
Page 53
6-3
6
6
Sp
eci
a
l F
eature
s
1
When you come to a step that requires you to enter the fax/
telephone number, use the numeric buttons to enter the
number up to where dial tone detection is required.
2
Press
D.T.
for dial tone detection.
• A small dot indicates where the machine will wait for the dial
tone.
3
Continue entering the rest of the fax/telephone number
with the numeric buttons.
• If you enter the wrong number, press and hold
, then start
again from step 1.
4
Continue with the operation you are performing.
■
Dialling Through a Switchboard
For details on dialling through a switchboard,
→
p. 2-6.
Restricting Use of Your Machine
By enabling this feature, you can prevent unauthorised use of your machine to make calls and send faxes.
Enabling Restriction of Your Machine
Follow this procedure to enable restriction of your machine:
1
Press
Menu
.
2
Use
or
to select
SYSTEM SETTINGS
.
3
Press
OK
three times.
4
Use
or
to select
ON
.
5
Press
OK
twice.
6
Use the numeric buttons to enter a four-digit password.
• This password prevents unauthorised access to the
LOCK
PHONE
setting that enables or disables restriction of your
machine. If you do not want to enter a password, ignore this
step.
Ex:
TEL=
345
Ex:
TEL=
345.
Ex:
TEL=
345.1234
▲
Ex:
MENU
7.SYSTEM SETTINGS
▲
▼
SYSTEM SETTINGS
1.UN/LOCK PHONE
UN/LOCK PHONE
1.LOCK PHONE
Ex:
LOCK PHONE
OFF
LOCK PHONE
ON
▲
▼
UN/LOCK PHONE
2.PASSWORD
PASSWORD
_
Ex:
PASSWORD
1234