Canon MPC600F/400 - Manual (Page 37)

4-9
4
4
Se
ndin
g
Fax
e
s
Cancelling Sending
Cancelling Memory Sending
■ Using the ADF
❚ While a document is scanning:
1 Press Stop/Reset .
• The transmission is cancelled.
• The machine prints an ERROR TX REPORT. (
→
p. 7-3)
• When a document remains in the ADF, remove the other documents from the ADF, and then press Resume . The
document remaining in the ADF will be ejected automatically.
❚ After scanning is completed:
1 Press Stop/Reset .
• The machine asks you to confirm that you want to cancel
sending.
2 Press to cancel sending.
• If you change your mind and want to continue sending, press .
• To cancel transmission of a document waiting to be sent, you
will have to delete it from memory. (
→
p. 4-15)
• The machine prints an ERROR TX REPORT. (
→
p. 7-3)
■ Using the Platen Glass
1 Press Stop/Reset .
• The transmission is cancelled.
• If dialling had begun, the machine prints an ERROR TX
REPORT. (
→
p. 7-3)
Cancelling Manual Sending Via the Handset
Refer to “Using the platen glass” above.
Ex:
CANCEL?
YES=( )
NO=(#)