COP-USA DVR5104DE-HWDWF - Manual (Page 46)

) ---Main Menu Setup Guide---
Mobile DVR User Manual
40
Chapter 4
Step2: In the authority interface, assign the definite operation
right for that user.
Step3: In the u ser management interface, click Setup button to
modify user name, user type and binding PC MAC address.
Step4: Select the user that needs to delete in the user list box and
then click Delete button to delete this user.
Step5: Click Change password button to modify the password;
click Exit button to exit the current interface.
Fig 4-35 add user-authority
4.8 P.T.Z Configuration
P.T.Z configuration includes two submenus: serial port and
advance
ᐭ
ᐭ Serial Port
Step1: Enter into System configurationÆP.T.Z
configurationÆSerial port. Please refer to Fig 4-36:
Step2: Select Enable and setup the value of address, baud rate
and protocol according to the settings of the speed dome.
Step3: Select All to setup all channels with the same
parameters.
Step4: Click “default” button to reset settings; click “apply” to
save the settings; click “exit” to exit the current interface.
Fig 4-36 P.T.Z configuration-serial port