COP-USA DVR5104DE-HWDWF - Manual (Page 34)

) ---Main Menu Setup Guide---
Mobile DVR User Manual
28
Chapter 4
4.3.4 Stamp
Stamp˖ ˖ User can overlap the channel name and time stamp on video.
Step1: Enter into System configurationÆ Record configurationÆ Stamp, referring to Fig 4-16:
Step2: Select camera name and time stamp. Then click Setting button. Now user can drag the camera name and time stamp
anywhere as shown below.
Fig 4-16 record configuration-stamp Before drag After drag
Step3: Select All to setup all channels with the same parameters.
Step4: Click “default” button to reset to the default setting; click “apply” button to save the settings; click “exit” button to exit
current interface.
4.3.5 Recycle Record
Step1: Enter into System configurationÆRecord configurationÆRecycle record;
Step2: Select recycle record to enable the recycle record function. It will cover the earlier recorded files and keep recoding when
HDD is full. If disenabled, it will stop recording when HDD is full.
Step3: Click “default” to reset to the default setting; click “apply” to save the settings; click “exit” to exit current interface.