COP-USA DVR5104DE-HWDWF - Manual (Page 39)

) ---Main Menu Setup Guide---
Mobile DVR User Manual
33
Chapter 4
ĸ ĸ Alarm Handling
The setup steps are similar with Join Up Alarm—Alarm handling. Please refer to chapter 4.5.1--ĸ Alarm handling.
Ĺ Schedule
The schedule setup steps of Car Sensor are familiar with schedule configuration. User can refer to chapter 4.4.1 Schedule for
details.
4.5.4 Video Loss
Step1: Enter into system configurationÆalarm configurationÆvideo loss, referring
to Fig 4-23:
Step2: The setup steps of video loss trigger are familiar with alarm handling; user
can refer to Chapter 4.5.1 Join Up AlarmÆalarm handling for more details.
Step3: User can tick off “all” to setup all channels with the same parameters.
Step4: Click “default” to reset to the default setting; click “apply” to save the
Fig 4-23 alarm configuration-video loss
setting; click “exit” to exit current interface.
4.5.5 Temperature Alarm
Temperature Alarm includes two sub menus: Basic and Alarm Handling.
Step 1: Enter into system configurationÆalarm configurationÆtemperature alarm,
referring to Fig 4-26:
Step 2: Select temperature Unit. Two options: Centigrade or Fahrenheit.
Step 3: Select the high temperature, low temperature and Sub-zero temperature.
Then set the temperature value.
Step 4: Click “Apply” button to save the settings. Then Click “Exit” to exit the
current interface.
Fig 4-24 temperature alarm-basic