COP-USA DVR5104DE-HWDWF - Manual (Page 38)

) ---Main Menu Setup Guide---
Mobile DVR User Manual
32
Chapter 4
4.5.2 Speed Alarm
Speed Alarm includes two sub menus: Speed Alarm and Alarm Handling.
ķ
ķ Basic
Step1: Enter into System configurationÆAlarm configurationÆSpeed Alarm;
referring to Fig 4-21:
Step2: Select speed source and speed unit.
Step 3: Enable high speed and low speed. Then set the speed value.
Step 4: Click “Apply” button to save the settings.
ĸ Alarm Handling
The setup steps are similar with Join Up Alarm—Alarm handling. Please refer
to chapter 4.5.1--ĸ Alarm handling.
Fig 4-21 alarm configuration-speed alarm
4.5.3 Car Sensor
Car Sensor includes three sub menus: Basic, Alarm Handling and Schedule.
ķ Basic
In this interface, user can enable car sensor.
Step1: Select Enable and type for the Name user wants to alarm. For
example: If the Left is enabled, the device will alarm when the vehicle turns
left.
Left, right, brake and reverse cannot be modified, but the remaining names
can be modified as required.
Step 2: Click “Apply” to save the settings. Then Click “Exit” to exit the
current interface.
Fig 4-22 alarm configuration-car sensor-basic