COP-USA DVR5104DE-HWDWF - Manual (Page 32)

) ---Main Menu Setup Guide---
Mobile DVR User Manual
26
Chapter 4
4.3 Record Configuration
Record configuration includes five sub menus: Enable, Record Bit rate, Time, Stamp and Recycle Record.
4.3.1 Enable
Step1: Enter into System configurationÆRecord configurationÆEnable.
Please refer to Fig 4-13:
Step2: Select record and audio.
Step3: Select All to setup all channels with the same parameters.
Step4: Click “default” button to reset settings; click “apply” button to save
the settings; click “exit” button to exit current interface.
Fig 4-13 record configuration-enable
4.3.2 Record Bitrate
Step1: Enter into System configurationÆRecord configurationÆRecord bit rate. Please refer to Fig 4-14:
Step2: Setup rate, resolution, quality, encode and max bit stream
Step3: Select All to setup all channels with the same parameters.
Step4: Click “apply” button to save the settings; click “exit” button to exit current interface.
Parameter Meaning
Record Record switch of every channels
Audio Enable live record audio
Note: If the rate value set is higher than the max resources of the device, the value will be
adjusted automatically.