COP-USA DVR5104DE-HWDWF - Manual (Page 30)

) ---Main Menu Setup Guide---
Mobile DVR User Manual
24
Chapter 4
Step4: Selecting All can setup all channels with the same parameters.
Recording Status
: After selecting this button, a little square icon will show on live preview interface when recording.
Step5: Click “apply” button to save the settings; click “exit” button to exit current interface.
4.2.2 Main Monitor
Step1: Enter into system configuration Æ Live configurationÆMain monitor
tab as Fig 4-10:
Step2: Select split mode: 1×1ǃ2×2 and channel
Step3: Dwell time means the time interval for a certain dwell picture display
switching to next dwell picture display
Step4: Select the split mode and then setup current picture group. Click
button to setup the previous channel groups of dwell picture and click
button to set the latter channel groups of dwell picture.
Step5: Click “Default” to reset settings; click “Apply” to save the settings;
click “Exit” to exit current.
Fig 4-10 live configuration-main monitor
4.2.3 Spot
Step1: Enter into System configurationÆLive configurationÆSpot interface. Please refer to Fig 4-11:
Step2: Select split mode: 1×1and channel
Step3: Dwell time means the time interval for a certain dwell picture display switching to next dwell picture display
Step4: Select the split mode and setup current picture group. Click
button to setup the previous channel groups of dwell
Note: Click Camera Name and then a soft keyboard will pop up. User can change the camera name at
will. Click shift button to input capital letters. Click shift button again to input Chinese words.