COP-USA DVR5104DE-HWDWF - Manual (Page 36)

) ---Main Menu Setup Guide---
Mobile DVR User Manual
30
Chapter 4
4.4.2 Car Sensor
Step1: Enter into System configurationÆSchedule configurationÆCar sensor.
Step2: The setup steps of motion are familiar with schedule. Please refer to 4.4.1 Schedule for more details.
4.4.3 Join Up
Step1: Enter into System configurationÆSchedule configurationÆJoin up.
Step2: The setup steps of alarm are familiar with schedule. Please refer to 4.4.1 Schedule for details.
4.5 Alarm Configuration
Alarm configuration includes seven sub menus: Join Up Alarm, Speed Alarm, Car Sensor, Video Loss, Temperature Alarm,
Other Alarm and Alarm out.
4.5.1 Join Up Alarm
Join Up Alarm includes three sub menus: Basic, Alarm Handling and Schedule.
ķ
ķ Basic
Step1: Enter into S ystem configurationÆAlarm configurationÆJoin up
alarmÆBasic, referring to Fig 4-18:
Step2: Enable Join up alarm and set the alarm type. Two option: NO and NC.
Step3: Select “all” to setup all channels with the same parameters.
Step4: Click “default” button to reset to the default setting; click “apply”
button to save the settings; click “exit” button to exit current interface.
Fig 4-18 alarm configuration-Join up alarm-basic
ĸ Alarm Handling
Step1: Enter into System configurationÆAlarm configurationÆ Join up alarm ÆAlarm Handling. Please refer to Fig 4-19:
Step2: Select hold time and click Setting button. Then a dialog box will pop-up as Fig 4-20: