COP-USA DVR5104DE-HWDWF - Manual (Page 26)

) ---Main Menu Setup Guide---
Mobile DVR User Manual
20
Chapter 4
4.1 Basic Configuration
Basic configuration includes five sub menus: system, date& time, DST, Car
Info and Time off/on.
4.1.1 System
Step1: Enter into system configurationÆBasic configurationÆSystem,
referring to Fig 4-3:
Step2: In this interface, user can setup the device name, device ID, video
format, max online users, Video Output and language, Screensaver and so
on. The definitions for every parameter are shown as below:
Device name:
The name of the device. It may display on the client end
or MCMS that helps users to recognize the device remotely.
Video format:
Two modes: PAL and NTSC. User can select the video
format according to that of camera.
Password check:
If this option is enabled, a user needs to input user
name and password. Fig 4-3 basic configuration-system
Show system time: Display time in live.
Startup wizard: If enabled, an opening wizard with time zone and time setup information will be displayed.
Max online uses: To set the max user number of concurrent user logins in the DVR.
Video output: Resolution of live display interface, range from: VGA800*600, VGA1024*768, and CVBS
Language : Setup the menu language.
Screensaver : User can setup the screensaver interval time (30s, 60s, 180s, and 300s). If there is no any operation within the
setting period, the device will auto logout and return to Login interface.
Note: Switching between VGA and CVBS will change the menu output mode. Please connect to relevant
monitor. After changed the language and video output, the device needs to login again.