Chapter 4 – COP-USA DVR5104DE-HWDWF User Manual
Page 37
)
---Main Menu Setup Guide---
Mobile DVR User Manual
31
Chapter 4
Fig 4-19 alarm configuration-sensor-alarm handling Fig 4-20 alarm handling-trigger
Buzzer:
If enabled, buzzer alarm out will be triggered;
Full screen alarm:
When triggering alarm, there will pop up full screen;
To alarm out:
Select the channel and then the alarm out will be triggered in the designated channel. Click OK button to save the
settings; click Exit button to exit the current interface.
To record:
Select recoding channels. It will record when alarm is triggered. Click OK button to save the settings; click Exit button
to exit the current interface.
To P.T.Z:
Set linked preset and cruise for alarm. User can select any channel and multiple channels as linked channels. Click OK
button to save the settings; click Exit button to exit the current interface.
Step4: Select “all” to setup all channels with the same parameters.
Step5: Click “default” button to reset to the default setting; click “apply” button to save the settings; click “exit” button to exit
current interface.
Ĺ
Ĺ
Schedule
The schedule setup steps of Join Up Alarm are familiar with schedule configuration. User can refer to chapter 4.4.1 Schedule for
details.