Chapter 4 – COP-USA DVR5104DE-HWDWF User Manual
Page 27

)
---Main Menu Setup Guide---
Mobile DVR User Manual
21
Chapter 4
4.1.2 Time & Date
Step1: Enter into system configurationÆBasic configurationÆTime & Date;
referring to Fig 4-4:
Step2: Set the date format, time format and time zone in this interface.
Step3: Select “sync time with NTP server” and update NTP server date or
select ”Sync Time with GPS” or set system date manually
Step4: Click “default” button to reset to the default setting; click “apply”
button to save the settings; click “exit” button to exit current interface.
Fig 4-4 basic configuration-time & date
4.1.3 DST
Step1: Enter into system configurationÆBasic configurationÆDST; refer
to Fig 4-5:
Step2: In this interface, enable daylight saving time, time offset, mode,
start & end month/week/date, etc.
Step3: Click “default” button to reset to the default setting; click “apply”
button to save the settings; click “exit” button to exit current interface.
Fig 4-5 basic configuration-DST