COP-USA DVR5104DE-HWDWF - Manual (Page 22)

) ---Basic Function Instruction---
Mobile DVR User Manual
16
Chapter 3
3 Basic Function Instruction
3.1 Power On/Off
Before you power on the unit, please make sure all the connection is good.
3.1.1 Power on
Step1: Start the vehicle.
Step2: The device will be started automatically and the power indicator will twinkle every 2 s.
Step3: A WIZZARD window will pop-up and show some information about time zoneˈtime setupˈnetwork configuration, record
configuration and disk management. User can setup here and refer to the concrete setup steps from the corresponding chapters.
If users don’t want to setup Wizard, please click Exit button to exit the Wizard setup interface.
A user can also start the device by pressing “Power” button on the remote controller.
3.1.2 Power off
When the vehicle stalls, the device will shut off automatically. User can also power off the device by using remote controller, and
mouse.
By remote controller:
Step1: Press Power button and then the Shut down window will appear. Then select OK to shut down.
Step2: Disconnect the power
Notice: This serials can only display menu on VGA or CVBS output at a time. If there is live image without menu
display, please check to see if other monitoring device has menu display first, or hold down ESC key to
wait for login dialog box to appear.