COP-USA DVR5104DE-HWDWF - Manual (Page 41)

) ---Main Menu Setup Guide---
Mobile DVR User Manual
35
Chapter 4
Step2: the setup steps of alarm out schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.
Ĺ
Ĺ Buzzer
Step1: Enter into System configurationÆBuzzer;
Step2: Select Buzzer and set buzzer alarm hold time
4.6 Network Configuration
Network configuration includes five submenus: Network,
Sub-stream, WIFI Setup, 3G Network and MCMS Setup.
4.6.1 Network
Step1: Enter into System configurationÆNetwork
configurationÆNetwork. Please refer to Fig4-27:
HTTP port:
The default value is 80.
Server port: Communication port. The default value is 6036.
Step2: If the "Obtain IP address automatically" is s elected, the
device will distribute IP address, subnet mask, gateway IP and DNS
service.
Step3: Click TEST button to test the effectiveness of the relevant
information. Next, click “Apply” to save settings.
Fig 4-27 network configuration-network
4.6.2 Sub Stream
Step1: Enter into system configurationÆnetwork configurationÆsub stream as shown in the Fig 4-28:
Step2: Select fps, resolution, quality, encode and max bit rate
Step3: Select “All” to setup all channels with the same parameters.