COP-USA DVR5104DE-HWDWF - Manual (Page 43)

) ---Main Menu Setup Guide---
Mobile DVR User Manual
37
Chapter 4
4.6.3 WIFI Setup
WIFI is mainly used for remote backup and upgrade.
The setting steps are as follows:
Step 1: Enter into WIFI Setup interface. Before WIFI is
enabled, a user needs to mount the WIFI antenna.
Step 2: Enable WIFI, click “Search Signal “, select the
wireless router and input the password to access this
router.
Step 3: Click “Setup” button to select “Obtain IP address
automatically” or manually input IP address.
Step 4: Click “Test” to test its validity.
Step 5: Click “Apply” to save the settings.
Fig 4-29 network configuration-WIFI setup
4.6.4 3G Network
Enable 3G module by selecting “3G Enable”. After it is enabled,
the device will automatically dial up and connect Internet.
3G type: WCDMA and EVDO. Please select it as required.
Dial Up Connect Point, APN Connect number, User name and
password shall be inputted according to the rules of network
operators. Take a card of WCDMA issued by China Unicom for
example:
Dial Up Connect Point: *99#
APN Connect number: 3GNET
Username and password: null.
Fig 4-30 network configuration-3G network