Seymour Midwest Roller Squeegee, Double Ribbed(PK90074) User Manual
Roller squeegee, Double-ribbed style assembly instructions, Replacement parts list
Roller Squeegee
Double-Ribbed Style
Assembly Instructions
Parts Shipped with Unit:
Head
assembly
Aluminum handle (not pictured)
Wrap-around brace (set of 2)
Bolt bag
Hook hardware bag
Tools Needed for Assembly:
7/16” wrench (two)
1/2”
wrench
If Roller Squeegee comes without a protective cardboard tube, proceed to
Handle Instructions.
If Roller Squeegee comes with a protective cardboard tube, follow these
instructions:
1. DO
NOT attempt to remove the tube by cutting.
2. On one end of roller, using a 1/2” wrench, remove the hex head bolt, loc
washer and axle.
3. Slide off cardboard tube.
4. Replace axle, loc washer, and bolt as shown. Tighten.
Handle Instructions:
1. Insert flat-tipped end of handle into channel-shaped crossbar. NOTE: This
may be a tight fit requiring working the handle back and forth.
2. Align holes and insert middle sized bolt. Do not tighten until all hardware is
in place.
3. Place hanging hook on label side of handle. Hook should be positioned so
squeegee can be hung, with roller head up, for drying or storing.
Wrap-Around Brace Instructions:
1. Align holes of flat end of braces with holes on head assembly and insert
the two shortest bolts.
2. Align holes of wrap-around end of braces with the handle, as shown, and
insert the longest bolt.
3. Start all loc nuts on bolts. Use wrenches to tighten, being careful not to
over-tighten. Over-tightening may result in crushing the handle, thereby
compromising its strength.
Mailing Address:
Shipping Address:
PO Box 1674
2666 S Country Club Rd
Warsaw, IN 46581-1674
Warsaw, IN 46580
REPLACEMENT PARTS LIST
See Reverse Side
PK90074
1/14/15
FULL WARRANTY
All
Seymour Midwest products carry a full warranty against manufacturer defects in quality and workmanship.
Products which have been abused or worn out from normal use are excluded from this warranty.
We reserve the right to replace or issue credit on an individual basis.
Phone: 8
44-SEYMOUR
FAX: 574-267-8508
��
www.
seymourmidwest.com