Seymour Midwest Excavator(PK90592) User Manual
Assembly instructions
Mailing
Address:
P.O. Box 1674
Warsaw, IN 46581-1674
Phone: 8
44-SEYMOUR
Fax: 574-267-8508
www.
seymourmidwest.com
Assembly Instructions
Tools Needed for Assembly:
- 1/2” wrench (two)
- Adjustable wrench
Parts Shipped with Unit:
- Undercarriage Assembly
- Bolt bag
- Wheel
- Steel tray
Assembly Instructions
1. Turn undercarriage over and unfold legs. (figure 1)
2. Bolt on cross braces using 1 short bolt for center and 2 long
bolts for ends. (figure 2)
3. Place wheel in between tabs on nose of undercarriage and
secure, using axle bolt. (figure 3)
4. Flip over undercarriage and fasten tray on with 6 short bolts.
(figure 4)
5. Make sure all bolts are tight.
FULL WARRANTY
All
Seymour Midwest products carry a full warranty against manufacturer defects in quality and workmanship.
Products which have been abused or worn out from normal use are excluded from this warranty.
We reserve the right to replace or issue credit on an individual basis.
PK90592
01/21/15
(figure 1)
(figure 2)
(figure 3)
(figure 4)
Long Bolts
Short Bolts
Axle Bolt