Seymour Midwest Landscape Rake(PK90078) - Manual

Mailing Address: Shipping Address:
PO Box 1674 2666 S Country Club Rd
Warsaw, IN 46581-1674 Warsaw, IN 46580
Landscape Rake
Assembly Instructions
Tools Needed for Assembly:
ƒ 7/16” wrench (two)
Parts Shipped with Unit:
ƒ Head
ƒ Aluminum handle with grip (not shown)
ƒ Wrap-around brace (set of 2)
ƒ Bolt bag for braces
Wrap-Around Brace Instructions:
1. Align holes of flat end of braces with holes on rake head, as shown,
and insert the two shortest bolts.
2. Align holes of wrap-around end of braces with the handle, as
shown, and insert the longest bolt.
3. Start all loc nuts on bolts. Use wrenches to tighten, being careful
not to over-tighten. Over-tightening may result in crushing the
handle, thereby compromising its strength.
PK90078
REPLACEMENT PARTS LIST
See Reverse Side
Assembly Instructions for Handle:
1. Insert flat-tipped end of handle into channel-shaped crossbar.
NOTE: This may be a tight fit requiring working the handle back
and forth.
2. Align holes and insert middle sized bolt. Do not tighten until all
hardware is in place.
01/21/15
FULL WARRANTY
All Seymour Midwest products carry a full warranty against manufacturer defects in quality and workmanship.
Products which have been abused or worn out from normal use are excluded from this warranty.
We reserve the right to replace or issue credit on an individual basis.
Phone: 8 44-SEYMOUR
FAX: 574-267-8508 ��
www. seymourmidwest.com