Seymour Midwest Light Lute(PK90047) User Manual
Light lute/lute, Instructions, Assembly
Mailing Address:
Shipping
Address:
P.O. Box 1674
2666 S Country Club Rd
Warsaw, IN 46581-1674
Warsaw, IN 46580
Light Lute/Lute
Assembly
Instructions
Tools Needed for Assembly:
- 7/16” wrench (two)
Parts Shipped with Unit:
- Head
- Aluminum handle (not shown)
- Braces:
-
Gusset braces (set of 2)
-
Bolt bag for gusset braces
AND/OR
-
Wrap-around braces (set of 2)
-
Bolt bag for wrap-around braces
Gusset Brace Instructions:
1. Slide slotted handle over center hole on the aluminum head.
2. Position one gusset on bottom of handle, as shown, and the other
gusset on top of the handle.
3. Insert the two longest bolts through the top gusset, the handle, and the
bottom gusset. Insert the two shortest bolts through the two remaining
holes. Install nuts, but do not tighten.
4. Tighten all nuts on rake, being careful not to over tighten. Over
tightening hardware may result in crushing the handle, thereby
compromising its strength.
NOTE: If you have chosen the Goliath bracing option, proceed with steps 1
through 3 of Gusset Brace instructions and steps 3 through 5 of Wrap-Around
Brace instructions.
REPLACEMENT PARTS LIST
See Reverse Side
PK90047
1/14/15
Wrap-around Brace Instructions:
1. Slide slotted end of handle over center hole on aluminum head.
2. Align holes and insert middle size bolt. Install nut, but do not tighten.
3. Align holes of flat end of braces with holes on rake head, as shown, and insert
the two shortest bolts. Install nuts, but do not tighten.
4. Align holes of wrap-around end of braces with the handle, as shown, and insert
the longest bolt. Install nut, but do not tighten.
5. Once all nuts have been installed, tighten until snug, being careful not to over
tighten. Over tightening may result in crushing the handle, thereby
compromising its strength.
FULL WARRANTY
All
Seymour Midwest products carry a full warranty against manufacturer defects in quality and workmanship.
Products which have been abused or worn out from normal use are excluded from this warranty.
We reserve the right to replace or issue credit on an individual basis.
Phone: 8
44-SEYMOUR
FAX: 574-267-8508
��
www.
seymourmidwest.com