Recording a marker message – Panasonic KX-F2710NZ User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Instructions
Erasing a specific message from memory
Press -¥r 4 when the message you want to erase is being played.
—The unit will erase the message just played back.
—A long beep followed by three short beeps will be heard. Then the unit
will continue with the next message.
Erasing all messages from memory
You can erase all the recorded messages in the accessing memory.
To erase all messages in mailbox, you must first select the mailbox.
Press * 5.
—A long beep followed by three short beeps will be heard.
—The unit will erase all the recorded messages.
N o te :
• The greeting messages will not be erased in this operation.
Recording a marker message
_____________________
After playing back the recorded messages, you can leave an additional message during the same call.
Wait for 3 beeps indicating the end of the remote operation and wait about 10 seconds for another 2 beeps
indicating that the unit is ready for recording, then you can leave your message.
3 beeps
Remote operation
2 beeps
Marker message (date, time, etc.)
10-second pause
61