Panasonic KX-F2710NZ - Manual (Page 39)

Programming Functions
User Programmable Features
The unit has the following programming features.
Basic features are the settings that need to be programmed upon completing the installation. Most
probable choices have been pre-selected, but some features, such as codes #01, #02 and #03, must be
programmed by user.
Advanced features should be programmed as the need arises.
Basic features _____________________________________
Code Feature Description Selection Page
#01 SET DATES TIME Setting the current date and time. 17
#02 YOUR LOGO Setting your company name or
personal name. up to 30 digits 17
#03 YOUR TELEPHONE
NUMBER
Setting your facsimile telephone
number. up to 20 digits 18
#04 PRINT
TRANSMISSION
REPORT
Setting individual transmission report
printing. ERROR/
ON/
OFF
18
#06 TEL7FAX RING COUNT Setting the number of rings on the
extension phone {if connected)
before the unit answers a call in the
TEUFAX mode. 2/3/4 32
#07 FAX RING COUNT Setting the number of rings to
answer in the FAX mode. 2/3/4 33
#08 ANS/FAX RING COUNT Setting the number of rings to
answer in the ANS/FAX mode. 2 to 9 rings
TOLL SAVER/
RINGER OFF
30
#09 RECORDING TIME
FOR ANS Setting the recording time for
incoming message. VOX (unlimited)/
1 MIN (Iminute)
14
#10 REMOTE ANS ID Setting the remote control ID for
remote operation of the answering
device.
1-3 digits
(III)
59
Note: In the “Selection" column, the underlined print indicates the pre-selected settings.
39