Сюоз, Cdcd, Setting the date and time – Panasonic KX-F2710NZ User Manual
Page 17: Setting your logo
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
installation and Preparation
Setting the date and time
The internal clock of the unit will print the date and time', on the top line of all fax messages you transmit,
and on the fax communication reports such as the journal report and the transmission report.
В
r^lMENUl
Press MENU.
1.SYSTEM SET UP
® СЮОЗ
Press #01.
SET DATE & TIME
О
START/lsin
О
Press START/SET.
01/01/95 12:C0A
',w
Notes:
к
i/Y
Enter the current
month/day/year/hour/
minute by selecting each
2 digits. Then press
for AM or press # for PM.
Example:
Aup. 10 7995, 3:00 PM
Press 08 10 95 03 00,
then press # to select
PM.
Press START/SET to
store the setting.
Press MENU to end the
program.
When you make a mistake while programming, press the STOP button, then make the correction.
The accuracy of the clock will be approximately ± 45 seconds a month at room temperature.
Setting your logo
The logo is used to identify fax messages that are being transmitted by your unit. It may consist of
alpha-numeric letters and symbols. Usually the logo is a company, division or personal name in an
abbreviated form.
( )|
menu
® CDCD
О
start
/[
set
1
о
Press MENU.
1.SYSTEM SET UP
Press #02.
YOUR LOGO
Press START/SET.
LOGO =
©
©
gdc
S
q
)
(Set)®
В
START/[S£
t
1
о
( )|
menu
Enter your logo up to
30 characters by
following the instructions
on page 15.
Press START/SET to
store the setting.
Press MENU to end the
program.
Note:
• When the first character is entered, the preset logo will be cleared.
17