Direct call station 2 (insert), Direct call station 4 (space), Direct call station 5 (delete) – Panasonic KX-F2710NZ User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation and Preparation
Special uses of the direct call station keys
Direct call stations 2, 4 and 5 are used as command keys.
Character key
-------------- E
0
4
o
SPACE 9
o
2
INSERT 7
0
5
DELETE 10
0
3
SECRET 8
6
LOWER
HYPHEN
■Command keys
The layout of the direct call station keys is printed on the reverse side of the directory card.
1. Remove the directory card cover with a pencil or similar object as shown.
2. Turn over the directory card. You will find how each command is assigned to the direct call station keys.
Direct call station 2 (INSERT):
This key is used to insert one character (or one
space) in the programmed logo.
Example; Compny-^Company
1. Press # or * repeatedly until the cursor is
positioned on "n".
LOGO=Compny
2. Press INSERT.
LOGO=Comp ny
3. Press 2 repeatedly until “a" is shown.
LOGO=Company
Direct call station 4 (SPACE):
This key is used to replace one character with a
space.
Direct call station 5 (DELETE):
This key is used to delete one character from
the programmed logo.
Example; Comnpany-^Company
1. Press # or * repeatedly until the cursor is
positioned on “n".
2. Press DELETE.
LOGO=Comnpany
LOGO=Company
16